V6.8.2 VVDI2 Full Version Commander Key Programmer With 13 Configurations

If you choose us dollar settlement, please contact customer service to modify the price to 1300$.

V6.8.2 VVDI2 Commander Key Programmer Full 13 Kinds Configuration

Note:Just as the software update at a high frequency,so that we cancel the CD in the package,sorry for this.But do not worry,we will send you the download link when you place an order,or you can contact me for the newest version,Hope you can understand that!

V6.8.2 VVDI2 Full Version Commander Key Programmer With 13 Configurations

Top 6 Reasons to Get VVDI2:

1. This VVDI2 Full Package Contains Basic Function + for VW + for BMW + for Porsche+ for PSA + for AUDI Generation 5 Function + for BMW OBD Fucntion + for BMW CAS4 Functions + Tango + J2534
2. VVDI2 Full Package Covers All the Functions ofVVDI,VVDI 5th IMMO Adapter,forBMW Multi Tool& CAS Plus for BMW Multi Tool
3. Support for VW,for Audi,for BMW,for Porsche & for PSA
4. Update Online Free Lifetime
5. Latest Version: V6.8.2
6. For VAG EDC17 PIN, MAC, CS calculation via eeprom and flash dump (the function can be activated even without having condor key cutter), please provide VVDI2 serial number to activate

V6.8.2 VVDI2 Full Version Commander Key Programmer With 13 Configurations

VVDI2 – for BMW FEM/BDC system (function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erase the key position become blank position)

4.support backup coding

5.support restore coding

Notes:

1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first

3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show:customer should use “for BMW E-sys software” program FEM/BDC system.then programming FEM/BDC system with VVDI2-for BMW

4.when operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.

5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.

6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car

or the car with window problem)please use “for BMW E-sys software” coding for FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

VVDI2 Software Update Informations:

VVDI2 latest software version V6.8.2 update

2021-01-05 Require firmware V6.8.1

===== for VAG V6.8.2 =====

1. Improvement for MQB/5C key learning

2.Improvement for autodetect for VAG immobilizer system

3. Bugfix

===== for BMW V6.8.2 =====

1. Bugfix

===== for Porsche V6.8.2 =====

1. Bugfix

===== for PSA V6.8.2 =====

1. Bugfix

===== Transponder Programmer V6.8.2 =====

1. Support make remote for XM proximite remote

2. Bugfix

===== Copy 48 (96 bits) V6.8.2 =====

1. Bugfix

===== J2534 V6.8.2 =====

1. Bugfix

===== Online Upate Tool V6.8.2 =====

1. Bugfix

===== Quick Start V6.8.2 =====

1. Bugfix

2020-11-25 Require firmware V6.8.1

!!!This version require update firmware V6.8.1!!!

===== for VAG V6.8.1 =====

1. Support MQB/5C prepare dealer key and learn key

1). Require KEYTOOL PLUS or for VAGOBD helper to get immo data

2). Add key: Require working key support; All key lost: require key synchronize data

3). Require VVDI proximity remote to generate MQB49/5C remote: need latest remote database V362

2. Improvement for autodetect for VAG immobilizer system

3. Bugfix

===== for BMW V6.8.1 =====

1. Bugfix

===== for Porsche V6.8.1 =====

1. Bugfix

===== for PSA V6.8.1 =====

1. Bugfix

===== Transponder Programmer V6.8.1 =====

1. Support make remote for MQB49/5C

2. Bugfix

===== Copy 48 (96 bits) V6.8.1 =====

1. Bugfix

===== J2534 V6.8.1 =====

1. Bugfix

===== Online Upate Tool V6.8.1 =====

1. Bugfix

===== Quick Start V6.8.1 =====

1. Bugfix

2020-11-05 Require firmware V6.8.0

!!!This version require update firmware V6.8.0!!!

===== For VAG V6.8.0 =====
1. Improvement for autodetect for VAG immobilizer system
2. Support Update/Unlock 8E electronic remote(A6/Q7 J518)
3. Bugfix

===== For BMW V6.8.0 =====
1. Improvement for FEM/BDC key learning
2. Bugfix

===== For Porsche V6.8.0 =====
1. Bugfix

===== For PSA V6.8.0 =====
1. Bugfix

===== Transponder Programmer V6.8.0 =====
1. Improvement for make remote
2. Immobilizer data tool:Asia->for Ssangyong->for Actyon->for Diesel-9S12(DST80) bugfix
3. Bugfix

===== Copy 48 (96 bits) V6.8.0 =====
1. Bugfix

===== J2534 V6.8.0 =====
1. Bugfix

===== Online Upate Tool V6.8.0 =====
1. Bugfix

===== Quick Start V6.8.0 =====
1. Bugfix

2020-03-31 Require firmware V6.6.8

===== For VAG V6.7.0 =====

1. Improvement for autodetect for VAG immobilizer system

2. Bugfix

===== For BMW V6.7.0 =====

1. Add unlock CAS4 fast mode(5M48H/1N35H/1L15Y):

1). Unlock CAS4 only require 2 minutes

2). Support backup D-FLASH(EEPROM), P-FLASH via OBDII

3). Support exchange CAS4 via OBDII

2. Improvement for CAS4 OBD prepare dealer key

3. Bugfix

===== for Porsche V6.7.0 =====

2. Bugfix

===== for PSA V6.7.0 =====

2. Bugfix

===== Transponder Programmer V6.7.0 =====

1. Add for Toyota 8A all key lost(Non-smartkey): Menu-> for Toyota 8A immobilizer system, Require 8A all key lost adapter.

2. Immobilizer data tool: Asia->for Suzuki->Swift->1996 93C66 bugfix

3. Immobilizer data tool: Asia->for Toyota->Camry->ECU -2004 93C56(2) bugfix

4. Immobilizer data tool: Asia->for Toyota->Avalon->ECU-93C56 bugfix

5. Bugfix for copy ID67 transponder

6. Bugfix

===== Copy 48 (96 bits) V6.7.0 =====

1. Bugfix

===== J2534 V6.7.0 =====

1. Bugfix

===== Online Upate Tool V6.7.0 =====

1. Bugfix

===== Quick Start V6.7.0 =====

1. Bugfix

2020-01-13Require firmware V6.6.8

===== For VAG V6.6.9 =====
1. Improvement for autodetect for VAG immobilizer system
2. Add synchronize function: Menu->Synchronize device time
3. Bugfix===== for BMW V6.6.9 =====
1. Improvement for CAS4 OBD prepare dealer key
2. Improvement for FEM/BDC prepare dealer key
3. Add synchronize function: Menu->Synchronize device time
4. Add reset ELV function for BDC(Only for cars with ELV)
5. Bugfix

===== for Porsche V6.6.9 =====
1. Add synchronize function: Menu->Synchronize device time
2. Bugfix

===== for PSA V6.6.9 =====
1. Add synchronize function: Menu->Synchronize device time
2. Bugfix

===== Transponder Programmer V6.6.9 =====
1. Add synchronize function: Menu->Synchronize device time
2. Immobilizer data tool: Asia->for Mitsubishi->ASX->2011 24C16 support VVDI proximity remote, you can have proximity function without key learning
3. Immobilizer data tool: USA->for Buick->Century->2000 68HC08 bugfix
4. Immobilizer data tool: Euro->for Volvo->XC90 2004- 93C86
5. Bugfix

===== Copy 48 (96 bits) V6.6.9 =====
1. Add synchronize function: Menu->Synchronize device time
2. Bugfix

===== J2534 V6.6.9 =====
1. Bugfix

===== Online Upate Tool V6.6.9 =====
1. Bugfix

===== Quick Start V6.6.9 =====
1. Bugfix

Special Function:

Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
VVDI PROG includes all the VVDI functions, The function of Tango, Remote control generation and chip identification is improved, And also the coil’s stability has been enhanced.
More ever, Users do no need to connect VVDI PROG with computer or other devices to identify chip or detect remote frequently.

Add more vehicle models
VVDI supports diagnostic function only for groups,But VVDI PROG has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI PROG can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.

Plug-in function, reserved connectors
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can read and write for Benz IR key, Can program key for old and new for Mercedes–Benz, Can connect for BMW plug to realize OBD function, And meanwhile reserve some connectors for further uses.

The core function is to detect the remote control frequency:
Automatically identify chip type
Support multi-function on for vehicles
Read for BMW ISN
Key programmer
Remote control programmer

J2534 compatible Adapter

1.Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer

2. Support vehicle diagnostic function
Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools

3. Support OBD functions on for BMW vehicles
Correct odometer
Generate key
Unlock Key

4. Fix CAS4 EEPROM key programmer
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control

5. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including:
ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.

VVDI2 Superiority
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool

There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.

Apart from free update online service and system optimization, more powerful functions and vehicle models (Like for Porsche) will soon be available via update. And other more functions, you name it.

VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.

VVDI2 – for VAG software:
For VAG software support for VAG cars:for VW,for Audi,for Seat,for Skoda, 4 th immobilizer for Porsche, 4 th immobilizer for Bentley .
Mainly include: Diagnostic, 4 th immobilizer, 5 th immobilizer, key learn, BCM remote control, Engine control unit, Kline instrument and immobox, adapt unit, component protection,dump tool etc.ou can find detail in VVDI2 – for VAG User Manual

VVDI2 – for BMW software

For BMW software support cars:for BMW. Support types can be find in Mainly function:Read/Write EWS, read CAS information，Read/Write CAS EEPROM,
Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with ELV, Key Learn(immo)，File Make Key, Unlock Key, File Change KM, CAS Repair etc OBD Flash ISTA version only need 10 minutes. (No extra power. No backup CAS EEPROM and FLASH).

VVDI2 – Transponder Programmer software

Transponder programmer software is a multifunctional immo transponder tool. Mainly include: transponder programming, special transponder, immobilizer data tool, other key data, prepare remote etc.

V6.8.2 VVDI2 Full Version Commander Key Programmer With 13 Configurations