【Software】Ford IDS 132.04 2025 Patched for ANY VCI

Ford IDS 132.04 2025 Patched for ANY VCI

Ford IDS 132.04 2025 Patched for ANY VCI

Ford IDS 132.04 2025 Patched for ANY VCI

————————————————————————————————–

For testing the patched IDS, I used the following diagnostic interfaces:

– Autroniq A100 & A200

– Ford VCM III

————————————————————————————————–

⚠️ Important Notes About Interfaces

Software works 100% with quality and genuine interfaces.

Please do not waste my time asking me to set up your interface with the software.

If your interface is not working with IDS, contact the seller of the interface.

The issue will always be with the your installation setup or your interface driver, not IDS.

❌ Poor quality interfaces: VNCI, VXDIAG

If you use rubbish interfaces, please do not waste my time.

————————————————————————————————–

🔧 Installation Step-by-step:

1 Install IDS-132_01_Full.exe

Important: Make sure you install it using the default path:

C:\Program Files (x86)\Ford Motor Company\IDS

2. Install FDRS_45.6.5_exe

3. Install VCI_Software_1.0.1.18

4. Download and Install Ford Driver for your VCI!

5. Restart your computer once the installations are complete.

6. Run the patcher as Administrator (Important!). If you don’t, it won’t work.

7. When prompted, type 1 to patch and press Enter. You should see a confirmation message saying the patch was successful.

8. Start the patcher again, and this time press number 2. This will popup the VCI Manager that will allow you to choose your VCI Type.

9. Once you chose the VCI, IDS will start.

10. You can now start IDS normally every time without need of patcher or VCI Manager.

Now you’re ready, enjoy!

💡 Notes

This Patch and IDS was tested on Windows 11 (fresh install, 64-bit).

You must also have FDRS and VCI Manager Installed together with IDS for it to work.

————————————————————————————————–

Troubleshooting

1. IDS Still Launches Login Page Issue:

This issue occurs when there is a permissions problem on your Windows system that prevents the patcher from changing the IDS Launcher target.

To fix this, please follow the steps below:

1. Right-click on your IDS shortcut.

2. Go to Properties.

3. In the Target field, change SubscriptionLauncher.exe to Tabman.exe.

4. Try running IDS again.

Please refer to the images inside the ZIP file for a visual tutorial on how to do this.

2. IDS Does not show VCI Manager icon in the program

To fix this issue follow the steps below;

1. Open IDS Patcher as administrator

2. Press number 2 and Enter.

3. Choose your VCI from the list and press OK

That’s it!

————————————————————————————————–