Autodata v3.45 + Keygen + Instruction

for Windows 7 when running RegSvr.bat right click and run as administrator (needed to register dll file)

installation instructions

run Install-x32.cmd for 32 bit system or run Install-x64.cmd for 64 bit system
run sentinel protection installer 7.6.1 or 7.6.6. follow prompts and install program
when installation window is finished press any key to close the window
right click (run as admin) and run RegSvr.bat Windows 7 and 8 only
double click regsettingsWin7.reg for 32 bit system or regsettings64.reg for 64 bit system (Windows 7 and 8 only)

now we need to install the sentinel hardware key emulator files

open the folder inside AD called emulator and open the folder win.i386-reg for 32 bit system or win.amd64-reg for 64 bit system
and install the file AuDaS032.exe for 32 bit system or AuDaS064.exe for 64 bit system.

now we need to get the hardware id of the pc we are installing on to create the software license.

ok open the folder GetUid-x32 and open the file getuid.exe for 32 bit systems or getuid64.exe for 64 bit systems
((right click and run as admin windows 7 and 8 only) for the 64 bit file you must run it, restart the pc and run it
again to get the correct hardware id otherwise you will get a code that looks like this 640000000 which is not correct) n.b
sometimes antivirus will flag the hardware id generator file as a trojan which is a false postive so instances of where the
likes of AVG and other antivirus systems are installed you must disable realtime protection otherwise the file will be removed
and you will have to open the compressed archive to create a new instance of the hardware id generator file.

you will now be shown a box with a 8 digit code for 32 bit system and a 10 digit code for 64 bit system.

Send me code and i will send you windows registry file for software license.

ok, run file and import it into the windows registry.

now we need to start the emulator we do this by going to the windows start menu and locating the folder nodongle.biz then
we open this and open the next folder AuDaSO and we click on the green traffic light icon to start the emulator.
(on windows 7 & 8 a box will appear which we click ok to accept the new hardware installation) .
you will now see in the bottom right hand corner a box informing you that windows has found new hardware
(sentinel hardware key shk) if you do not see this message after two minutes
(can take between 5 secs to 2 minutes depending on the pc) so have a little patience.

FOR LICENCE USE BAT FILE.
EDIT BAT WITH YOUR ID, SAVE, RUN AS ADMINISTRATOR AFTER.
AFTER YOU HAVE GENERATED .REG FILE, IMPORT TO REGISTRY AND REBOOT.
YOU WILL HAVE NOW AD345 ACTIVE.